Winterisation that Works
The TankBlanket Kit
TankBlanket: The Campervan Motorhome & Caravan Tank Heater Pad
If you are a Dealer fitting TankBlanket as an aftermarket upgrade or a confident DIY enthusiast that wants to retro-fit TankBlanket, then, the TankBlanket Kit is the most simplest, efficient and cost effective method.
The TankBlanket Kit is available in four formats:
i. The TankBlanket 121 Kit
ii. The TankBlanket 90 Kit
iii. The TankBlanket Fitting Kit (excludes a TankBlanket)
iv. The ‘Big Pack’
and contains everything you need to install TankBlanket excluding tools.
A TankBlanket kit comprises:
a. A TankBlanket
b. A 15A fuse and self stripping fuse holder
c. 6 off Male crimp receptacles
d. 6 off Female shrouded receptacles
e. 12 off fixing clips
f. 10 off cable clips
g. Solvent cleaning pads
h. Silicon sealer
i. Rubber protection strip
j. Flexible cable conduit
k. Two core electric cable
l. 2 off ring terminals
m. A 15A rated switch
n. 1 off Piggy back connector
Note: The Fitting Kit contains all of the above except a TankBlanket
Before attempting to install TankBlanket please study and digest our Fitting instructions and the TankBlanket 12V electrical circuit.
If you have any queries or need clarification then please contact us.
The TankBlanket System: Winterisation that Works!
Why not join our community on Facebook or follow us on Twitter to learn more about TankBlanket in operation or even contact us via our support page?
If so please leave a comment at the bottom of this blog. Thanks in advance.
Do you have any ideas or suggestions?
If so, please visit our website and leave feedback on our ‘Ideas’ tag,
located on the left hand side of our home page.
To find out more about The TankBlanket System please visit: