Tuesday 22 November 2016

Grade 3 Testing - Demystified !

Motorhome & Caravan  Winterisation: Grade 3 Explained!

 

The vast majority of Motorhome marketing now includes winterisation as a key selling feature.

Attend any motorhome or caravan show and you will be bombarded with stickers displayed on product and brochures that declare 'this motorhome is Grade 3 accredited' and is a ‘winterised’ vehicle that can be used ‘all year round’.

So what is Grade 3 and what does ‘winterisation’ mean?
Simply, Grade 3 is a British standard for heating and insulation while ‘winterisation’ is a term open to a plethora of interpretation.

For this blog, winterization is taken to mean a motorhome that can be used in freezing conditions with free flowing fresh and waste water.

Grade 3 emanates from the British standard BS EN 1646-1:2012 titled ‘Leisure accommodation vehicles – Motor caravans part 1: Habitation requirements relating to health and safety’.  Within section 9 of this standard is the detail relating to three levels of motor caravan heating. These are:

motorhometrips.blogspot.com
Grade 1: No heating.

Grade 2:  When the outside temperature is 0°C the internal temperature must be held at an average of at least 20 °C for a defined period of time.

Grade 3: When the outside temperature is -15°C the internal temperature must be held at an average of at least 20 °C for a defined period of time.

The test has to be performed under controlled conditions and is subject to certain criteria so results can be reproduced and compared with statistical integrity. The standard states that the test should be performed in a cold chamber with temperature probes located at specific points.

The test is subject to four time based criteria. These are:

Phase 1: The vehicle is soaked a in cold chamber for at least 10 hours to achieve a temperature of 0 °C or -15 °C throughout, depending whether it is a grade 2 or 3 test.

Phase 2: Upon reaching its soak temperature the habitation heating system is switched on and the vehicle is given up to 2 hours or 4 hours to achieve an internal temperature of 20 °C, again, depending whether it is a grade 2 or 3 test.

Phases 3 & 4: Once the internal temperature of 20 °C has been achieved a 1 hour stabilizing period commences before monitoring of the thermal energy consumption takes place.

 This is the important statement for those wishing to use their vehicle throughout the year:

The standard states that ‘precautions’ should be taken to ensure that the fresh water system can be charged at the end of the 1 hour stabilising period (phase 3) and operate while the external temperature is at -15 °C.

This means the business end of the test is performed with a dry vehicle and water is only added at the end of the one hour stabilising period, that is, when the vehicle's internal temperature is at 20°C.

If the vehicle under test achieves all of the above criteria then it is accredited as a Grade 3 Motorhome.

So, Grade 3 is a thermal insulation and heating standard. A motorhome with Grade 3 will keep you warm in freezing conditions but it will not provide you with free flowing fresh and waste water during sub zero temperatures.
So, who in the UK manufactures a genuinely ‘winterised’ motorhome, one that can be used all year round with confidence that the water system is not going to freeze up? Let's see what 2014 brings!

In our next blog, insights gained from cold chamber testing of TankBlanket, the water tank heater, will be discussed. So, why not follow us?


TankBlanket : The water tank heater


End

Wednesday 16 November 2016

TankBlanket Season is approaching ... Get informed!

 
 
 
 
 
TankBlanket:  Winterisation that Works
 

 The TankBlanket Season is upon us!
Get Informed, read the story so far..

 
TankBlanket: The Campervan, Motorhome & Caravan Tank Heater Pad

If you are new to TankBlanket then please read on - this Blog will inform and guide you through the World of TankBlanket.

Each year more Motorhomers are using their vehicles through out the year and as a result they need to protect their fresh and waste water systems from freezing .........................


Enter the TankBlanket!.........

Which can be purchased individually or in Kit form, which supplies you with everything required to install TankBlanket successfully.... excluding the tools of course!


   
 

And, installation is simple too :-







 You can read about the impact TankBlanket has made here:


 
 
 
We know you may want, will want, to understand what TankBlanket is before making that purchase, so here are the facts, plain and simple:





And, to see how TankBlanket performed under test read on :





Also, you may be interested in the insights gained by a leading manufacturer during cold chamber testing...




 

And, against the competition... it was a Turkey Shoot..........





Finally, if you are still with us, then Grade 3, which is the sticker you see displayed on Motorhomes and Caravans certifying it has been winter tested, is explained :





Have you found this blog informative, interesting?


If so please leave a comment at the bottom of this blog. Thanks in advance. 

Do you have any ideas or suggestions?

If so, please visit our website and leave feedback on our ‘Ideas’ tag,

located on the left hand side of our home page. 


To find out more about The TankBlanket System please visit:

http://www.tankblanket.co.uk/http://www.tankblanket.co.uk/

  end

Fresh & Waste Water : Tank Level Indicators - That Work!

An inaccurate level reading from either your fresh or waste water tank is frustrating! But, now, direct from the USA,  Premier Leisu...