The Campervan Motorhome & Caravan Tank Heater Pad
If you are a Dealer fitting TankBlanket as an aftermarket upgrade or a confident DIY enthusiast that wants to retro-fit TankBlanket, then, the TankBlanket Kit is the most simplest, efficient and cost effective method.
The TankBlanket Kit is available in five formats:
- The 121 Kit
- The 90 Kit
- The 152 Kit
- The Fitting Kit (which excludes a Tank Blanket)
- The ‘Big Pack’
and contains everything you need to install TankBlanket excluding tools.
A TankBlanket kit comprises:
a. A TankBlanket
b. A 15A fuse and self stripping fuse holder
c. 6 offf Male crimp receptacles
d. 6 off Female shrouded receptacles
e. 12 off fixing clips
f. 10 off cable clips
g. Solvent cleaning pads
h. Silicon sealer
i. Rubber protection strip
j. Flexible cable conduit
k. Two core electric cable
l. 2 off ring terminals
m. A 15A rated switch
n. 1 off Piggy back connector
Note: The Fitting Kit contains all of the above except a TankBlanket
 |
Before attempting to install TankBlanket please study and digest our Fitting instructions and the TankBlanket 12V electrical circuit.
The TankBlanket System: Winterisation that Works!
Why not join our community on Facebook or follow us on Twitter to learn more about TankBlanket in operation or even contact us via our support page?
If so please leave a comment at the bottom of this blog. Thanks in advance.
To find out more about The TankBlanket System please visit:
No comments:
Post a Comment